Heavy Equipment and Loader Repair in Midland, TX
Bulldozers, excavators, wheel loaders, skid steers, and telehandlers. We service the equipment that does not fit in a standard shop, at our 140 by 150 ft Midland facility or at your job site across West Texas and the oil field. Every machine is diagnosed by testing, repaired and inspected by Chris before it goes back to work.
Heavy Equipment Services
Heavy Equipment and Loader Repair Services
We work on the equipment most shops will not touch, and we work on it where it makes sense for the machine. Here is what that covers.
Bulldozer Repair and Maintenance
Engine diagnostics, hydraulic system service, undercarriage work, and full repair for dozers running in West Texas dirt.
Learn MoreExcavator Repair
Boom and arm hydraulics, swing drives, engine and electrical repair, and scheduled maintenance for tracked excavators of all sizes.
Learn MoreSkid Steer and Compact Track Loader Repair
Hydrostatic drives, loader hydraulics, tracks, and quick attach repair on Bobcat, John Deere, Case, Cat, and Kioti machines. In the shop or at your site.
Learn MoreTelehandler Repair
Telehandler boom, hydraulic, drive, and engine repair for the machines used across Permian Basin oilfield operations.
Learn MoreMobile Heavy Equipment Repair
Field repair via our crane service trucks. When the equipment cannot come to the shop, the shop comes to the equipment.
Learn MoreHydraulic Repair
Hydraulic pump, cylinder, valve, and hose repair across the full range of construction and oilfield equipment. Cylinder rebuilds handled in the shop or in the field.
Learn MoreHeavy Equipment Engine Rebuild
Chris and his team rebuild heavy equipment engines in house at our Midland shop. Not outsourced, not exchange units, and Chris test runs every engine before delivery.
Learn MoreHeavy Equipment Diagnostics and Electrical Repair
Full electrical troubleshooting, sensor and harness repair, and diagnostics for modern heavy equipment control systems.
Learn MoreWheel Loader Repair
Powershift and hydrostatic drivetrains, axles, loader hydraulics, and bucket repair for full-size wheel loaders. Loader repair handled in the shop or in the field.
Learn More
Everything Under One Roof.
Engine work, hydraulics, electrical, and structural repair all happen inside our 140 by 150 ft Midland facility. No vendor round robin, and no waiting on an outside shop to send a component back before the next step can start.
When a machine cannot be hauled, the same work happens on location through mobile heavy equipment repair. For oilfield operators, contractors, and fleet managers running equipment across the Permian Basin, that flexibility is the entire economics of the repair.
Heavy equipment engines rebuilt at our Midland shop rather than shipped out or swapped for exchange units.
Midland, Odessa, and the oilfield territory across West Texas. Equipment comes in from across the Basin.
Continental and Bosch dealer. OEM parts specified where the repair calls for them, and the best available standard where they do not.
Permian Basin Oil Field
We Know What Downtime Costs Out There.
We service the telehandlers, skid steers, loaders, and heavy equipment used across West Texas oilfield operations. The equipment that keeps rigs moving, lifts tubulars, loads pipe, and sets up locations. Cracked buckets, booms, and frames go through our welding and fabrication shop rather than out to a third party.
When a machine is down in the middle of a 24-hour operation, every hour is a real number. Our OEM parts policy and in-house engine rebuild capability exist because that math is unforgiving. Fleet operators running multiple machines across the Permian Basin can call us and we will get the equipment working again.
The Standard We Run By
Equipment Goes Back Better Than It Came In.
Every repair in our 140 by 150 ft Midland facility is personally inspected by Chris before the equipment returns to your site. Here is the record that built the shop.
Common Questions
Heavy Equipment FAQ
What types of heavy equipment do you repair?
Bulldozers, excavators, wheel loaders, skid steers and skid loaders, telehandlers, and most construction and oilfield equipment across Midland, Odessa, and the Permian Basin. We handle diagnostics, hydraulic systems, engine repair and rebuild, drivetrain work, and structural welding. If it runs, we can service it. If it is broken, we fix it right.
Which equipment brands do you work on?
Our team repairs equipment from CAT, John Deere, Komatsu, Case, Bobcat, Volvo, JLG, and Kioti. Hydraulic layouts and control systems differ between manufacturers, but the method does not: test first, find the actual failure, then quote the repair. Call (432) 557-6500 with the make, model, and what the machine is doing.
Do you rebuild engines on heavy equipment?
Yes. Chris and his team rebuild heavy equipment engines in house at our 140 by 150 ft facility in Midland, TX. Not outsourced, not exchange units. Every rebuild uses OEM parts where the repair calls for them, and Chris test runs the engine before the equipment returns to your site.
Do you repair equipment on site?
Yes. When hauling a machine is not practical, our crane service trucks bring the repair to the job site instead. Details on what can be handled in the field are on our mobile heavy equipment repair page.
Do you service oilfield equipment?
Yes. We repair the telehandlers, skid steers, loaders, and heavy equipment used across West Texas oilfield operations. We know what downtime costs out there, and we will tell you honestly when a machine is worth repairing and when it is not.
Do you repair boom trucks and crane trucks?
Yes. A truck-mounted crane or boom truck is a vehicle, and we service it the way we service any heavy truck. That covers engine work, drivetrain, hydraulics, electrical, and structural welding on the bed and frame. We do not service crawler cranes, tower cranes, or standalone lifting equipment.
What does heavy equipment repair cost in Midland, TX?
It depends on what testing finds, so we test first and quote second. You get an itemized written estimate after diagnosis and before any work begins, and the diagnostic time is the cheapest money on the invoice because it prevents parts roulette. Call (432) 557-6500 and describe what the machine is doing.
Equipment Down? Let’s Get It Tested.
Call us with your equipment type, the job site location, and what it is doing. We will tell you whether it is a field repair or a shop repair, and we will tell you honestly. Serving Midland, Odessa, and the Permian Basin.