Welding Repair for Vehicles and Equipment in Midland, TX

Welding repair on exhaust, suspension components, fuel tanks, wheels and rims, and the mechanical parts that crack or break under load. Auto welding, truck welding, and heavy equipment weld repair all happen at Chris’s Diesel Service in Midland. Welding is in-house here, so the repair is planned, welded, and put back in service by one shop, with the mechanical cause fixed in the same visit.

Call (432) 557-6500
Request a Welding Estimate
Causefixed
Weld Plus Why It Broke
Inhouse
No Waiting on a Weld Shop
Zero
Comebacks in 2025
What Broke and How We Fix It

Broken Metal Has a Reason.

A repair weld that ignores the cause is an appointment to do it again. These are the common breaks we see on cars, trucks, diesel vehicles, and equipment, and how each one gets handled.

Cracked exhaust manifold, pipe, or hanger
How We Fix It Exhaust welding with the right process for the material, cast repairs approached honestly, and hangers rebuilt stronger than stock. We also check why it cracked: a failed mount shaking the system, or heat cycling on a tired part. On diesel trucks the cause often sits upstream in the engine and turbo system.
Broken suspension bracket or spring hanger
How We Fix It Safety-critical, treated that way. Hangers and brackets welded full depth or refabricated, alignment checked after, and the overload or worn bushing that caused the break addressed in the same job through our brake and suspension service.
Cracked or leaking wheel or rim
How We Fix It Rim welding on steel and aluminum wheels where the damage allows it, with the seal checked under pressure after the weld. Wheel welding is a judgment call every time. A crack in the barrel is often repairable, and damage at the bead seat or through a spoke usually is not. We tell you which one you have before you spend money on it.
Wheel damage found during tire service
How We Fix It A tire that will not hold air is often a cracked or corroded rim rather than the tire itself. We dismount, inspect the wheel, and weld it when the damage sits in a repairable area. Trailer wheels and equipment wheels included.
Leaking fuel tank or reservoir
How We Fix It Tank repairs are done with the proper safety procedure or not at all: purged, tested, and verified before the weld. Where a repair is not the safe call, we say so and quote the replacement honestly.
Cracked mechanical bracket or mount
How We Fix It Engine mounts, accessory brackets, and crossmember tabs welded or rebuilt with gusseting where the design keeps failing. Vibration is usually the killer, so the worn mount feeding it gets flagged too.
Broken step, bumper, or body hardware
How We Fix It Steps, grab handles, bumpers, and rack hardware rewelded or refabricated, finished so they do not become the rustiest part on the truck. Small welds done right instead of ignored until they grow.
Sheared or cracked equipment component
How We Fix It Guards, tabs, linkages, and mechanical parts on trucks and heavy equipment repaired with material-matched welds. When the part is past saving, custom fabrication builds a replacement in the same building.
How It Works

Weld the Break. Fix the Reason.

The weld is half the repair. The other half is making sure the same part is not back on the bench next month.

  1. 01

    Find the Cause

    Vibration, overload, rust, or a worn part upstream. The break gets diagnosed like the mechanical failure it is, and you get an itemized quote for the real fix.

  2. 02

    Prep and Weld

    Metal cleaned to bright, crack ends drilled, and the weld matched to the material, including cast and aluminum where repairable. Reinforced where the design earned it.

  3. 03

    Finish and Prove

    Welds dressed, coated against rust, hardware torqued, and the vehicle or machine run under load before release. Signed off by Chris like everything else that leaves.

Technicians working at the in-house welding station at Chris's Diesel Service in Midland, Texas
Standards and Capability

Why In-House Welding Changes the Job.

Shops without in-house welding send your truck across town and wait. Here the weld happens in the next bay, the same day, planned together with the mechanical work instead of around it. Being a welding repair shop and a full auto and diesel shop in one building is what makes that possible. Cars, trucks, and equipment come in from Midland, Odessa, and the surrounding Permian Basin.

  • No Middleman One shop plans the repair, makes the weld, and stands behind both. No coordination failures between a mechanic and a weld shop who never talk.
  • Mechanical Context The welding happens next to the people replacing your mounts and bushings, so the cause of the break gets fixed in the same ticket.
  • Safety Lines Respected Fuel tanks, suspension, and steering-adjacent welds follow proper procedure or get an honest no. Some parts are replace-only, and we tell you which.
  • Field Option Our crane-equipped service trucks bring repair welding to broken-down units across a 100-mile radius when hauling in does not make sense. See our mobile heavy equipment repair service for what the field trucks cover.
Welding Repair FAQ

Common Questions

Can you weld a leaking fuel tank safely?
Sometimes, and only with the proper safety procedure: the tank purged, tested, and verified before any arc gets near it. When the tank’s condition makes repair the wrong call, we tell you plainly and quote a replacement. No shortcuts on fuel, period.
Do you weld cracked wheels and rims?
Yes, on steel and aluminum wheels where the damage is in a repairable area. A crack in the barrel usually welds well and holds. Damage at the bead seat, through a spoke, or across the mounting face is replace-only, and we will not weld it back into service. We inspect the wheel first and tell you which one you have. Trailer and equipment wheels included.
Can cast iron parts like manifolds be welded?
Often, with the right process, preheat, and filler, and we approach cast repairs honestly: some castings repair well and some are throwaways. We tell you which yours is before you spend money, and quote the replacement path when welding is the false economy.
Is it safe to weld suspension parts?
Brackets, hangers, and mounts, yes, when done to structural standards, and we treat them as safety-critical work. Springs, torsion bars, and certain heat-treated components are replace-only, and we will not weld them. Knowing the difference is part of the job. Frame and chassis work is covered on our structural frame welding page.
Why do my repaired parts keep breaking again?
Because the weld fixed the break and nobody fixed the cause: a dead engine mount feeding vibration, a worn bushing shifting the load, or a design point that needs gusseting. We diagnose the reason, weld the part, and address the cause in the same visit.
Do you repair welding machines?
No. We use welding to repair vehicles and equipment, and we do not service welding machines or welder generators. If your welding equipment needs repair, a welding supply dealer is the right call. What we handle here is weld repair on exhaust, suspension, tanks, wheels, mounts, and mechanical parts.
What does repair welding cost in Midland, TX?
Small brackets and hangers are quick, honest work, and structural or fuel-system repairs take proper time. You get an itemized estimate after assessment and before work begins, including the mechanical cause if one needs fixing. Call (432) 557-6500 and describe the break.

Something Cracked, Broke, or Leaking?

Get the break welded right and the reason fixed in the same visit. One shop, one ticket, done once.

Call (432) 557-6500
Request a Welding Estimate
Related Welding Services

Repair welds sit next to structural and fabrication work. Same shop, same standard.

Structural Frame Welding Heavy Equipment Welding Custom Welding and Metal Fabrication
Back to Welding and Fabrication Shop